AH-HP-PAPI LED Precision Approach Path Indicator-AH-HP-PAPI

AH-HP-PAPI LED Precision Approach Path Indicator

AH-HP-PAPI

The LED Precision Approach Path Indicator (PAPI) is used to guide aircraft to approach the runway at an appropriate altitude.Such as Permanent, Temporary, Emergency Helipad/Airport/Helideck. It is specially designed to accommodate the helicopter'...

LED Heliport Inset Light AH-HP-I Serial-AH-HP-I

LED Heliport Inset Light AH-HP-I Serial

AH-HP-I

Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Aiming point light, perimeter light of FATO (Final approach and take-off areas), TLOF ...

AH-HP-R3 Airport Rotating Beacon-AH-HP-R3

AH-HP-R3 Airport Rotating Beacon

AH-HP-R3

The heliport beacon shall be located on or adjacent to the heliport/Airport preferably at an elevated position and so that it does not dazzle a pilot at short range. This Rotated beacons is for night operation as identification and location markers for airports.

Heliport Light Wireless Radio Controller （VHF remote controller）-AH-HP-G-VHF

Heliport Light Wireless Radio Controller （VHF remote controller）

AH-HP-G-VHF

heliport light remote controller, pilot to ground control

AH-HP-CHAPI LED CHAPI Heliport Approach Path Indicators-AH-HP-CHAPI

AH-HP-CHAPI LED CHAPI Heliport Approach Path Indicators

AH-HP-CHAPI

The LED CHAPI Heliport Approach Path Indicators (CHAPI) uses LED technology to provide the pilot with safe and accurate glide slope on final approach to the helipad. A set of two LED CHAPI Light Housing Assemblies (LHAs) are seen by the pilot in combinations of white, green and red to indicate a path that is too high, too low or within the 6° ±0°15' glide slope.

AH-HP-E1 LED Heliport Elevated light-AH-HP-E1

AH-HP-E1 LED Heliport Elevated light

AH-HP-E1

Heliport Elevated light use for Helipad/Heliport TLOF edge areas; Heliport FATO edge;Helipad Runway edge; Helipad taxiway edge; should not exceed a height of 25cm. There is a fragile coupling in the base connection, so if aircraft hit the light by accident, the base will break immediately to avoid more damage.

AH-HP-B2 LED Heliport Beacon-AH-HP-B2

AH-HP-B2 LED Heliport Beacon

AH-HP-B2

A heliport beacon should be provided at a heliport where long-range visual guidance is considered necessary and is not provided by other visual means; or identification of the heliport is difficult due to surrounding lights. The heliport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. AH-HP-B2 flashes white color 4 times/0.8second and stop for 1.2s, then start new circle for 2 seconds(0.8s+1.2s ).

AH-HP-W1 Internally llluminated Heliport Wind Cone-AH-HP-W1

AH-HP-W1 Internally llluminated Heliport Wind Cone

AH-HP-W1

An aerodrome shall be equipped with at least one wind cone as wind direction indicator. The flood light for illumination is inside wind sock, it will rotate together with windsock too. One obstruction light on top for aircraft warning.

AH-HP-H Helideck Circle-H Light-AH-HP-H

AH-HP-H Helideck Circle-H Light

AH-HP-H

Helideck Circle-H Light is for the heliport identification marking “H” and the circle, The design of thickness (＜ 25MM ) make it easily installed and suitable for all kinds of heliport.